1625 Digital Cutting Machine for KT Board Fiberboard – Full Range

Tool Head Versatility — seven interchangeable heads on one flatbed platform let packaging fabricators switch between corrugated flute, greyboard, foam, and laminated inserts without adding a second machine.

Technical Specifications

Application Suitability

Why Material Thickness Matters More Than Working Area on a CNC Digital Cutting Machine Manufacturer Selection

A machine quoted solely on table size often fails when the real job involves dense, layered, or adhesive-backed stock.

I watched a customer lose an entire production week because the cutting head specified for their KT board display stands could not hold a clean edge through the high-density fiberboard they actually ran. The vacuum held the sheet, the gantry moved at rated speed, but the knife deflected on every pass, leaving ragged edges that required manual trimming. That mismatch was not visible in the brochure — it only appeared once the material hit the table [NEED_CITE: oscillating knife deflection on high-density fiberboard versus standard corrugated].

Mapping the Full Machine Range by Method and Volume

This catalogue positions each flatbed configuration against the material families it serves, so buyers comparing a CNC digital cutting machine manufacturer can narrow the right method before committing to a tool head. Oscillating knife handles the majority of packaging substrates — single and double-wall corrugated, greyboard, foam, and fabric — while driven rotary and kiss cutting tools take over where adhesive-backed laminates and thin films require clean release without full-depth penetration.

Matching Knife Type to Flute Profile and Ply Count

Selecting between an oscillating knife and a creasing wheel is not a generic choice; E-flute single-wall responds to high-frequency oscillation with minimal dust, whereas BC-flute double-wall demands a pneumatic knife with greater downward force to compress and shear in one stroke. When the ply count or flute profile changes mid-run, operators switch heads in minutes rather than re-fixturing the entire sheet [NEED_CITE: corrugated flute profile cutting parameters].

What the Specification Table Actually Tells You

The 9 kW vacuum pump paired with an aluminum bellows table delivers full-surface adsorption across the 1600×2500 mm bed, which matters when cutting nested small parts from corrugated or foam stock where edge lift would otherwise ruin registration. Servo drive selection across Panasonic, Delta, and Dorna options allows the control loop to be tuned to the inertia of the specific gantry mass and cutting force, keeping the ±0.1 mm accuracy figure meaningful at production speed rather than only during slow tracing. File format compatibility with PLT, DXF, AI, and PDF means the dedicated packaging box structure design software can import nesting layouts from common CAD outputs without intermediate conversion steps that introduce geometry errors.

The Hidden Cost of an Unverified Configuration

A creasing wheel set for standard B-flute will crush E-flute micro-corrugated rather than score it, producing a visible fracture line on the printed face that the customer rejects at assembly. Voltage and frequency mismatches discovered after the machine arrives can stall commissioning for weeks while transformers or drive replacements are sourced locally [NEED_CITE: voltage and frequency standards by export market]. Without a sample cutting report on the buyer’s actual material, the cutting thickness figure remains a catalogue claim rather than a verified production parameter.

Why Source This Range from a Single CNC Digital Cutting Machine Manufacturer

In-house design and production span both knife and laser cutting technologies, so a buyer can match the cutting method to the material rather than force one method across incompatible substrates. Tool head and table configurations are specified per material and production volume, not sold as a default package. CCD camera positioning is available for printed contour work on packaging prototypes where registration to artwork is mandatory. Software compatibility is confirmed against the buyer’s existing file formats before the order is placed. Voltage, language, and specification customization are documented in the electrical schematic rather than assumed. Sample cutting on the buyer’s own material is completed before commitment, providing a physical reference rather than a datasheet promise.

Documentation & Verification

• Machine specification sheet confirming working area, tool head options, and cutting thickness per target material
• Electrical schematic with voltage and frequency matched to destination market (110V, 220V, or 380V)
• Sample cutting report on buyer-supplied corrugated, foam, or laminate stock
• Software licence and file format compatibility note for PLT, DXF, AI, PDF workflows
• Factory test record documenting accuracy and edge quality before dispatch
• Packing photographs showing tool head configuration and safety device placement

Installation, Commissioning & Support

• Heavy-duty frame requires level concrete floor; machine dimensions 3300×2100×1350 mm dictate aisle clearance
• Dedicated circuit for 9 kW vacuum pump separate from PLC control power supply
• Aluminum bellows vacuum table arrives pre-assembled; gantry and tool head require on-site alignment
• PLC intuitive interface configured to selected language (English, Russian, Italian, Chinese, or custom) during commissioning
• Servo drive parameters (Panasonic, Delta, or Dorna) tuned to installed tool head mass and cutting force
• Infrared sensor and emergency stop devices tested under load before operator handover

What to Include in Your Inquiry

Provide the material type, flute profile or density, maximum sheet size, and daily volume so the correct tool head and vacuum zoning can be specified. Confirm the local voltage and frequency standard along with the preferred control language to avoid on-site rewiring. If you run existing nesting software, share a sample file in PLT, DXF, AI, or PDF format so compatibility is verified before the quotation stage.

Frequently Asked Questions

Q: How do I choose between oscillating knife and laser for my packaging material?
A: Oscillating knife suits corrugated, greyboard, foam, and fabric where cold cutting preserves edge integrity and avoids thermal sealing. Laser applies to acrylic, wood, and textile where edge sealing is beneficial. The decision depends on material composition and whether heat-affected zones compromise downstream assembly or print quality.

Q: Which tool head handles corrugated flute, greyboard, and foam on the same machine?
A: The oscillating knife covers most corrugated flute profiles and greyboard up to the rated thickness. Foam and adhesive-backed materials may require the pneumatic knife for greater downward force or the kiss cutting tool for partial-depth cuts. Heads are interchangeable on the 1625 platform without mechanical modification.

Q: Is CCD camera contour recognition available for printed packaging artwork?
A: CCD camera positioning is offered across the range for printed contour tracking. Registration accuracy depends on print mark size, contrast, and camera resolution. Confirm mark specifications during the sample cutting phase so the system is calibrated before shipment.

Q: What voltage and language options are confirmed before shipment?
A: Voltage is configurable at 110V, 220V, or 380V depending on the destination market. Control language defaults to English, Russian, Italian, or Chinese, with special languages customizable. Both parameters are documented in the electrical schematic and confirmed before production begins.