Paper Board Die Cutting Machine with 100m/min – Full Range

Tool Head Matched to Material — the RT-D2516/RT-S2516 is configured with oscillating, drag, creasing or milling tools only after your specific substrate and thickness have been tested on our sample table.

Technical Specifications

Application Suitability

Why the Thickness Question Beats the Working Area Question Every Time

Specifying a digital flatbed cutting table for sale on table size alone is the most common reason packaging lines stall within the first month.

A machine can have the footprint you need but lack the knife stroke, vacuum hold-down force or motor torque to pull through your actual board grade. I have watched machines rated for standard grey board choke on dense double-wall corrugated once daily volume picked up, producing crushed edges and forcing operators to slow the feed rate to a crawl [NEED_CITE: material thickness versus oscillating knife stroke requirements]. That bottleneck rarely appears during a one-off sample test.

Matching the Knife to the Board Grade

The RT-D2516 and RT-S2516 carry a multifunctional head that switches between vibration full cutting, half cutting and cursor location within a single work cycle. For packaging work, the choice between oscillating and drag knife is not cosmetic — oscillating action slices through dense corrugated and honeycomb cores without crushing the flute structure, while a drag knife suits thin card and vinyl where edge finish on curves matters more.

Vacuum Zoning That Follows the Cut Path

The aluminum alloy honeycomb table divides into independent adsorption zones. As the CNC oscillating knife cutting machine manufacturer we build the zoning logic to track the cutting area so that small cartons and nested parts stay flat without requiring full-table vacuum draw, which wastes energy and can lift lightweight substrates at the edges [NEED_CITE: vacuum table zoning effect on thin flexible material hold-down].

Servo Stability at Production Traverse Speeds

Taiwan Delta servo motors paired with Hiwin linear guides hold repeated accuracy within 0.1 mm across the full 1600 × 2500 mm working envelope. Translational velocity reaches 800 – 1200 mm/s, but the real measure is whether the carriage maintains positional accuracy after hours of direction changes — a function of rail preload and belt tension specification rather than peak speed on a brochure.

Reading the Parameter Sheet Beyond the Headline Numbers

Cutting speed is listed at 200 – 800 mm/s, yet that range only holds when material type and thickness are defined. A 2 mm PVC foam board will run at the upper end; a 15 mm dense grey board forces the lower range and may require multiple passes. The 9 kW rated power covers spindle and motion but the 7.5 kW vacuum pump runs on a separate circuit — both must be accounted for when planning shop-floor electrical capacity [NEED_CITE: electrical circuit separation for vacuum pump and main spindle on CNC cutting tables]. The HP-GL compatible instruction system and included carton nesting software accept common vector formats, but file compatibility should be confirmed against your existing design workflow before the order is locked.

What Happens When the Tool Head and Material Disagree

Select a drag knife for thick corrugated and the blade drags instead of slicing, leaving torn flute edges that fail glue-line inspection further down the packaging line. Undersized vacuum zoning on small nested parts lets the board lift mid-cut, shifting registration by several millimetres and scrapping the entire sheet. These failures do not appear on a sample board cut slowly under supervision — they surface three weeks into a production schedule [NEED_CITE: vacuum hold-down failure modes on small nested corrugated parts].

What You Actually Get When You Source from This Catalogue

In-house design covers both knife and laser cutting technologies under one roof, so the recommendation starts with your material rather than with whichever machine is on the showroom floor. Every tool head and table configuration is specified against your substrate and daily volume, not quoted from a standard list. Software compatibility is verified against your file formats before the order is confirmed. Voltage, plug type and control language are locked in writing prior to shipment. Your own material is cut, measured and shipped back to you as a sample report before any commitment is made [NEED_CITE: sample cutting verification protocol for CNC flatbed equipment].

Documentation & Verification

• Machine specification sheet confirming RT-D2516/RT-S2516 tool head and table configuration for your board grade
• Sample cutting report on your actual corrugated or grey board stock with edge quality photographs
• Electrical schematic with confirmed voltage, frequency and plug type for your facility
• Software licence and file format compatibility note matching your nesting workflow
• Factory test record documenting repeated accuracy across the full 1600 × 2500 mm envelope

Installation, Commissioning & Support

• Fully assembled delivery requiring only placement on a level floor rated for the 3450 × 2300 mm footprint
• Dedicated 380V circuit for the 9 kW main system and separate circuit for the 7.5 kW vacuum pump
• First-run parameter tuning on your specific board thickness and cutting path geometry
• Operator training covering tool change, vacuum zone adjustment and HP-GL file import procedures
• Spare knife blades, belts and vacuum seals listed with reorder intervals in the manual

Before You Send an Inquiry

Tell us the board grade, flute profile and maximum thickness you run most days, not just the sheet you plan to test. Share your daily output target and whether you run nested layouts or single-piece cuts. Confirm your local voltage and frequency, the control language your operators need, and whether your existing nesting software exports HP-GL or another vector format. If your production mix includes printed contour work, flag that early so we can discuss CCD camera options across the range.

Frequently Asked Questions

Q: How do I choose between oscillating knife and laser for my packaging material?
A: Oscillating knife suits corrugated, grey board and honeycomb paper where edge crush must be avoided and no burn mark is acceptable. Laser is reserved for thin film, fabric and engraved acrylic where sealed edges are desired. Your material type, thickness and acceptable edge finish determine which method applies before any machine is quoted.

Q: Where does the RT-D2516/RT-S2516 sit within the broader flatbed cutting range?
A: The 1600 × 2500 mm working area covers most standard carton and signage sheet sizes. Compact models handle smaller label and tag work, while large-format tables extend beyond 2500 mm for oversized display board. The catalogue lays out each family so you can match sheet size to table without oversizing the footprint.

Q: Which tool heads are available across the knife cutting range?
A: Oscillating knife, drag knife, creasing wheel, milling spindle and pen tool are available depending on model. For packaging, oscillating knife handles thick board while creasing wheel scores fold lines in the same cycle. The correct head is selected after your material is identified, not added as a generic option.

Q: Can voltage and control language be customised before shipment?
A: Voltage, plug type and frequency are confirmed to your local supply before the machine enters production. Control language is set from available options including English, Russian, Italian and Chinese. These details are documented in the specification sheet and electrical schematic before dispatch.